Send me your stripped down 500 model Roomba and for $188 receive the following mods and shipping.

1.  Ball bearing mod to your existing Cleaning Head Module - Brush Deck. - This will prevent the "Please Inspect and Clean Roombas Brushes" error.

2.  Upgrade of both IR devices in both Bumper sensors.  - This will resolve or prevent the "9 Beep Error" condition

3.  Replacement of the 1N5400 charging system diode with a 1N5401 diode.  - The original diode can fail causing false indications of charging in progress.

4.  Replacement of the four base plate mean metal Phillips head screws with nylon thumb screws.  - This will prevent further damage to the screw mounting holes.

5.  Installation of a sealed ball bearing on your existing side brush module.  - This may prevent the entry of debris into the side brush module.

USPS return of your Modded out Roomba back to you.

Stripped down Roomba = Removal of both drive wheels, as well as the battery and also the removal of the two cleaning brushes from the Cleaning Head Module Brush Deck.  Remove the dust bin and Re-install the wire brush guard prior to packing and shipping.

Just send your paypal payment to e_vickery@bellsouth.net and ship your Roomba here:

Ed Vickery

730 Amy Ln

Haughton, LA

71037-4902

                                        - or -